
Add to Cart
Laser Lipolysis 30w/60w 980nm Laser Weight Loss Laser Diode Liposuction
Lipolysis and liposuction are both procedures used for fat removal, but they differ in terms of technique and purpose.
Here's an explanation of each:
980nm Lipolysis (Laser Lipolysis):
This procedure uses laser technology, often with a wavelength of 980nm, to target and break down fat cells beneath the skin.
A small, fiber-optic laser is inserted through tiny incisions in the skin.
The laser energy heats up and liquefies the fat cells, which are then either naturally eliminated by the body's lymphatic system
or removed with liposuction.
Laser lipolysis is considered less invasive than traditional liposuction, and it can be used for smaller areas of fat removal and
for skin tightening.
It is sometimes referred to as "laser liposuction" or "smart lipo."
Liposuction:
Liposuction is a surgical procedure that involves the physical removal of fat cells from the body using a suction device (cannula).
It can be performed under local or general anesthesia, depending on the extent of the procedure.
Liposuction can target larger areas of fat and is often used for body contouring.
Traditional liposuction does not use lasers but relies on the physical extraction of fat cells.
There are various techniques within liposuction, including tumescent liposuction, power-assisted liposuction, and ultrasound-assisted
liposuction, among others.
Application:
Technical Parameters:
980nm diode laser machine | 2 machines combination (lipolysis machine+liposuction) |
Beam Transmission | Biquartz optical fiber transmission |
Laser Type | Pulse , CW, single |
Wavelength | 980nm+liposuction |
Power | 30W/60W |
Pulse width | 0-1s (stepping 0.05s) |
Pulse duration | 0-1s (stepping 0.05s) |
Pilot Beam | Red Diode Laser of 635nm, Power<5mW |
Power requirement | AC120V±22V,60HZ±1HZ/AC230V±22V, 50HZ±1HZ |
Liposuction Max negative pressure value | ≥0.075MPa |
Pumping rate | ≥15L/min |
Reservoir volume | 1000mL, 1piece |
Working system | short running |
Company: